PLANET WGSD-1022 - Manual (Page 59)

4.5.6 MSTP Interface Settings
Network Administrators can assign MSTP Interface settings using the MSTP Interface Settings screen
(see figure 4-22).
Figure 4-22 MSTP Interfance Settings screen
The MSTP Interface Settings screen contains the following fields:
• Instance ID#
Lists the MSTP instances configured on the device. Possible field
range is 0-15.
• Port#
Indicates the interface for which the MSTP settings are displayed.
The possible field values are two types:
• Port - Specifies the port for which the MSTP settings are
displayed.
•
LAG - Specifies the LAG for which the MSTP settings are
displayed.
• Port State
where indicates whether the port is enabled for the specific instance
• Type
Indicates if the port is a point-to-point port, or a port connected to a
hub. The possible field values are:
• Boundary Port, attaches MST bridges to LAN in an outlying
region. If the port is a boundary port, it also indicates whether the
device on the other side of the link is working in RSTP or STP
mode.
• Master Port, where provides connectivity from a MSTP region to