PLANET WGSD-1022 - Manual (Page 199)

Vlan IP Address Querier Ports
------- ------------------------------------- ------------- ------------
1 224-239.130|2.2.3 Yes e1, g2
19 224-239.130|2.2.8 Yes e5-8
5.10 IP Addressing Commands
5.10.1 ip address
The ip address interface configuration command sets an IP address. To remove an IP address, use the
no form of this command.
Syntax
ip address ip-address {mask | prefix-length}
no ip address [ip-address]
ƒ ip-address — IP address
ƒ mask — The IP address network mask. The IP address network mask 255.0.0.0 (prefix length 8)
to 255.255.255.252 (prefix length 30)
ƒ prefix-length — The number of bits that comprise the IP address prefix. The prefix length must be
preceded by a forward slash (/). (Range: 8 -30)
Default Configuration
No IP address is defined for interfaces.
Command Mode
Interface configuration (Ethernet, VLAN, port-channel, out-of-band Ethernet)
User Guidelines
An IP address cannot be configured for a range of interfaces (range context).
Example
The following example configures VLAN 1 with the IP address 131.108.1.27 and subnet mask
255.255.255.0.
Console (config)# interface vlan 1
Console (config-if)# ip address 131.108.1.27 255.255.255.0