PLANET WGSD-1022 - Manual (Page 283)

DSA (DSS) key was generated.
SSH Public Key Authentication is enabled.
Active incoming sessions:
IP address SSH username Version Cipher Auth Code
---------------- ---------------- --------------- -------------- -------------------
172.16.0.1 John Brown 2.0 3 DES HMAC-SH1
The following table describes the significant fields shown in the display:
Field Description
IP address Client address
SSH username User name
Version SSH version number
Cipher Encryption type (3DES, Blowfish, RC4)
Auth Code Authentication Code (HMAC-MD5, HMAC-SHA1)
5.22.10 show crypto key mypubkey
The show crypto key mypubkey privileged EXEC command displays the SSH public keys on the
device.
Syntax
show crypto key mypubkey [rsa | dsa]
rsa—RSA key.
dsa—DSA key.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SSH public keys on the device.
Console# show crypto key mypubkey rsa