PLANET WGSD-1022 - Manual (Page 197)

Console (config)# interface vlan 2
Console (config-if)# ip igmp snooping leave-time-out 60
5.9.7 show ip igmp snooping mrouter
The show ip igmp snooping mrouter User EXEC command displays information on dynamically
learned multicast router interfaces.
Syntax
show ip igmp snooping mrouter [interface vlan-id]
ƒ vlan_id — VLAN ID value.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows IGMP snooping mrouter information.
Console # show ip igmp snooping mrouter
VLAN Ports
--------- -----------
2 e1
5.9.8 show ip igmp snooping interface
The show ip igmp snooping interface User EXEC command displays IGMP snooping configuration.
Syntax
show ip igmp snooping interface vlan-id
ƒ vlan_id — VLAN ID value.
Default Configuration
This command has no default configuration.