PLANET WGSD-1022 - Manual (Page 47)

• Ingress Filtering
Enables or disables Ingress filtering on the port. Ingress filtering
discards packets which do not include an ingress port
• LAG
Indicates the LAG to which the VLAN is defined
Port Mode VLAN Membership Frame Leave
Access Belongs to a single untagged VLAN
Untagged
( Tag=PVID be removed)
General
Allowed to belongs to multiple untagged
VLANs at the same time
Untagged
(Tag=PVID be removed)
Trunk
Allowed to belongs to multiple Tagged
VLANs at the same time
Tagged
(Tag=PVID or Original VID be remained)
4.4.3 VLAN Group
The Ports to VLAN screen contains fields for configuring ports to a VLAN. The port default VLAN ID
(PVID) is configured on the Create VLAN screen. All untagged packets arriving to the device are tagged
by the ports PVID. The Ports to VLAN screen contains a Port Table for VLAN parameters for each port.
Ports are assigned VLAN membership by selecting and configuring the presented configuration options,
you can refer to figure 4-13.
Figure 4-13 Ports to VLAN screen