PLANET WGSD-1022 - Manual (Page 333)

Default Configuration
The default for the device is disabled.
Command Mode
Global Configuration mode
User Guidelines
You must use the crypto certificate generate command to generate the HTTPS certificate.
Example
The following example enables the device to be configured from a browser.
Console (enable)# ip https server
5.28.4 ip https port
The ip https port global configuration command configures a TCP port for use by a secure web browser
to configure the device. To use the default port, use the no form of this command.
Syntax
ip https port port-number
no ip https port
ƒ port-number — Port number for use by the HTTP server. (Range: 0 - 65535)
Default Configuration
This default port number is 443.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the https port number to 100.
Console (enable)# ip https port 100