PLANET WGSD-1022 - Manual (Page 72)

4.7.6 Policy Qos
Policy Qos (see figure 4-32) provides rules for specifying flow classification and assigning rule actions
that relate to bandwidth management. The rules are based on the Access Control Lists (see Access
Control Tab)
Figure 4-32 Policy Qos screen
MAC ACLs and IP ACLs can be grouped together in more complex structures, called policies. Policies
can be applied to an interface. Policy ACLs are applied in the sequence they appear within the policy.
Only a single policy can be attached to a port.
In advanced QoS mode, ACLs can be applied directly to an interface in the Security -ACL Binding.
However, a policy and ACL cannot be simultaneously applied to an interface.
After assigning packets to a specific queue, services such as configuring output queues for the
scheduling scheme, or configuring output shaping for burst size, CIR, or CBS per interface or per queue,
can be applied.
Out of Profile DSCP Assignments, this button opens up the DSCP Map screen. (see figure 4-33):