PLANET WGSD-1022 - Manual (Page 246)

ƒ owner ownername — Records the RMON statistics group owner name. If unspecified, the name
is an empty string.
ƒ buckets bucket-number — A value associated with the number of buckets specified for the
RMON collection history group of statistics. If unspecified, defaults to 50. (Range: 1 - 65535)
ƒ interval seconds — The number of seconds in each polling cycle. If unspecified, defaults to 1800.
(Range: 1 - 3600)
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
This command cannot be executed on multiple ports using the interface range ethernet command.
Example
The following example enables a Remote Monitoring (RMON) MIB history statistics group on port e8 with
the index number "1" and a polling interval period of 2400 seconds.
Console (config)# interface ethernet e8
Console (config-if)# rmon collection history 1 interval 2400
5.19.3 show rmon collection history
The show rmon collection history user EXEC command displays the requested history group
configuration.
Syntax
show rmon collection history [ethernet interface | port-channel port-channel-number]
ƒ interface — Valid Ethernet port.
ƒ port-channel-number — Valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.