PLANET WGSD-1022 - Manual (Page 280)

User Guidelines
AAA authentication is independent.
Example
The following example enables public key authentication for incoming SSH sessions.
Console (config)# ip ssh pubkey-auth
5.22.6 crypto key pubkey-chain ssh
The crypto key pubkey-chain ssh global configuration command enters SSH Public Key-chain
configuration mode. The mode is used to manually specify other device public keys such as SSH client
public keys.
Syntax
crypto key pubkey-chain ssh
Default Configuration
By default, there are no keys.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enters the SSH Public Key-chain configuration mode.
Console(config)# crypto key pubkey-chain ssh
Console(config-pubkey-chain)#
5.22.7 user-key
The user-key SSH public key chain configuration command specifies which SSH public key is manually
configured and enters the SSH public key-string configuration command. To remove a SSH public key,
use the no form of this command.
Syntax
user-key username {rsa | dsa}
no user-key username