PLANET WGSD-8020 - Manual (Page 84)

User’s Manual of WGSD-8020
84
4.4.5 SFP Module Information
You can check the physical or operational status of an SFP module via the SFP Module Information page. This page shows the
operational status, such as the transceiver type, speed, wavelength and supports distance of SFP module on a specific interface.
You can also use the hyperlink of port no. to check the statistics on an speficic interface.
Figure 4-4-6 SFP Module Information for Switch page screenshot
The page includes the following fields:
Object Description
• Type Display the type of current SFP module, the possible types are:
„
1000Base-SX
„
1000Base-LX
„
100Base-FX
• Speed Display the spedd of current SFP module, the speed value or description is get
from the SFP module. Different vendors SFP modules might shows different
speed information.
• Wave Length(nm) Display the wavelength of current SFP module, the wavelength value is get from
the SFP module. Use this column to check if the wavelength values of two nodes
are the matched while the fiber connection is failed.
• Distance(m) Display the supports distance of current SFP module, the distance value is get
from the SFP module.