PLANET WGSD-8020 - Manual (Page 146)

User’s Manual of WGSD-8020
146
4.9.6 Bandwidth Control
Configure the switch port rate limit for Policers and Shapers on this page. The settings relate to the currently selected stack unit,
as reflected by the page header. The screen Bandwidth Control in Figure 4-9-14 appears.
Figure 4-9-14 Bandwidth Control Configuration page screenshot
The page includes the following fields:
Object Description
•
Port The logical port for the settings contained in the same row.
•
Policer Enabled Enable or disable the port policer. The default value is "Disabled".
•
Policer Rate Configure the rate for the port policer. The default value is "500". This value is
restricted to 500-1000000 when the "Policer Unit" is "kbps", and it is restricted to
1-1000 when the "Policer Unit" is "Mbps"
•
Policer Unit Configure the unit of measure for the port policer rate as kbps or Mbps. The
default value is "kbps".
•
Shaper Enabled Enable or disable the port shaper. The default value is "Disabled".
• Shaper Rate Configure the rate for the port shaper. The default value is "500". This value is
restricted to 500-1000000 when the "Policer Unit" is "kbps", and it is restricted to
1-1000 when the "Policer Unit" is "Mbps"
• Shaper Unit Configure the unit of measure for the port shaper rate as kbps or Mbps. The
default value is "kbps".