PLANET WGSD-8020 - Manual (Page 275)

User’s Manual of WGSD-8020
275
6.4 Port Management Command
Port Configuration
Description:
Show port configuration.
Syntax:
Port Configuration []
Parameters:
: Port list or 'all', default: All ports
Example:
Display port1~4 status
SWITCH/>port configuration 1-4
Port State Mode Flow Control MaxFrame Power Excessive Link
------ -------- ------ ----------------- --------------- -------- ------------ ----
1 Enabled Auto Disabled 9600 Enabled Discard Down
2 Enabled Auto Disabled 9600 Enabled Discard Down
3 Enabled Auto Disabled 9600 Enabled Discard Down
4 Enabled Auto Disabled 9600 Enabled Discard 100fdx
Port State
Description:
Set or show the port administrative state.
Syntax:
Port State [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable port
disable : Disable port
(default: Show administrative mode)
Default Setting:
Enable
Example:
Disable port1
SWITCH/>port state 1 disable