PLANET WGSD-8020 - Manual (Page 223)

User’s Manual of WGSD-8020
223
•
Sys Name Optional TLV: When checked the "system name" is included in LLDP information
transmitted.
•
Sys Descr Optional TLV: When checked the "system description" is included in LLDP
information transmitted.
• Sys Capa Optional TLV: When checked the "system capability" is included in LLDP
information transmitted.
The system capabilities identifies the primary function(s) of the system and
whether or not these primary functions are enabled. The information advertised
by this TLV is described in IEEE 802.1AB.
• Mgmt Addr Optional TLV: When checked the "management address" is included in LLDP
information transmitted.
The management address protocol packet includes the IPv4 address of the
switch. If no management address is available, the address should be the MAC
address for the CPU or for the port sending this advertisement. The management
address TLV may also include information about the specific interface associated
with this address, and an object identifier indicating the type of hardware
component or protocol entity associated with this address
4.14.3 LLDP Neighbor
This page provides a status overview for all LLDP neighbors. The displayed table contains a row for each port on which an
LLDP neighbor is detected. The LLDP Neighbor screen in Figure 4-14-2 appears.
Figure 4-14-2 LLDP Neighbor Information page screenshot
The columns hold the following information:
Object Description
•
Local Port The port on which the LLDP frame was received.
•
Chassis ID The Chassis ID is the identification of the neighbor's LLDP frames.
•
Remote Port ID The Remote Port ID is the identification of the neighbor port.