PLANET WGSD-8020 - Manual (Page 159)

User’s Manual of WGSD-8020
159
4.10.2 Access Control List Configuration
This page shows the Access Control List (ACL), which is made up of the ACEs defined for this Managed Switch. Each row
describes the ACE that is defined.
„ The maximum number of ACEs is 128.
„ Click on the lowest plus sign to add a new ACE to the list.
The Access Control List Configuration screen in Figure 4-10-12 appears.
Figure 4-10-12 Access Control List Configuration page screenshot
The page includes the following fields:
Object Description
• Ingress Port Indicates the ingress port of the ACE. Possible values are:
• Any: The ACE will match any ingress port.
• Policy : The ACE will match ingress ports with a specific policy.
• Port: The ACE will match a specific ingress port.
• Frame Type Indicates the frame type of the ACE. Possible values are:
• Any: The ACE will match any frame type.
• EType: The ACE will match Ethernet Type frames.
• ARP: The ACE will match ARP/RARP frames.
• IPv4: The ACE will match all IPv4 frames.
• IPv4/ICMP : The ACE will match IPv4 frames with ICMP protocol.
• IPv4/UDP: The ACE will match IPv4 frames with UDP protocol.
• IPv4/TCP: The ACE will match IPv4 frames with TCP protocol.
• IPv4/Other: The ACE will match IPv4 frames, which are not
ICMP/UDP/TCP.
• Action Indicates the forwarding action of the ACE.
• Permit: Frames matching the ACE may be forwarded and learned.
• Deny: Frames matching the ACE are dropped.
• Rate Limiter Indicates the rate limiter number of the ACE. The allowed range is 1 to 15. When
Disabled is displayed, the rate limiter operation is disabled.