PLANET WGSD-8020 - Manual (Page 42)

User’s Manual of WGSD-8020
42
4.2 System
Use the System menu items to display and configure basic administrative details of the Managed Switch. Under System the
following topics are provided to configure and view the system information: This section has the following items:
■ System Information Provides basic system description, including contact information.
■ IP Configuration Sets the IPv4 address for management access.
■ IPv6 Configuration Sets the IPv6 address for management access.
■ Users Configuration Configure the system user name and password required to access the web
pages or log in from CLI.
■ Users Provolege Levels Provides an overview of the users privilege levels.
■ NTP Configuration Network Time Protocol. Configures NTP client settings, including broadcast
mode or aspecified list of servers.
■ UPnP Configure UPnP.
■ DHCP Relay Configure DHCP Relay.
■ DHCP Relay Statistics Provides statistics for DHCP relay.
■ System Log Provides switch system log information here.
■ Detail Log Provides switch detail log information here.
■ Web Firmware Upgrade Upgrade the firmware via Web browser
■ TFTP Firmware Upgrade Upgrade the firmware via TFTP server
■ Configuration Save Save/view the switch configuration to remote host
■ Configuration Upload Upload the switch configuration from remote host
■ Factory Default Reset the configuration of the Managed Switch
■ System Reboot Restarts the Managed Switch.