PLANET WGSD-8020 - Manual (Page 205)

User’s Manual of WGSD-8020
205
4.12 Security
This section is to control the access of the Managed Switch, includes the user access and management control.
The Security page contains links to the following main topics:
„ Access Management
„ HTTPs / SSH
„ DHCP Snooping
„ IP Source Guard
„ ARP Inspection
4.12.1 Access Management
Configure access management table on this page. The maximum entry number is 16.
Figure 4-12-1 Access Management Configuration page screenshot
The page includes the following fields:
Object Description
Mode Indicates the access management mode operation. Possible modes are:
„
Enabled: Enable access management mode operation.
„
Disabled: Disable access management mode operation.
Delete Check to delete the entry. It will be deleted during the next save.
Start IP address Indicates the start IP address for the access management entry.
End IP address Indicates the end IP address for the access management entry.
HTTP/HTTPS Indicates the host can access the switch from HTTP/HTTPS interface that the
host IP address matched the entry.
SNMP Indicates the host can access the switch from SNMP interface that the host IP
address matched the entry.
TELNET/SSH Indicates the host can access the switch from TELNET/SSH interface that the
host IP address matched the entry.