PLANET WGSD-8020 - Manual (Page 264)

User’s Manual of WGSD-8020
264
Syntax:
SNMP Trap IPv6 Destination []
Parameters:
: IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a colon
separates each field (:). For example, four hexadecimal digits with a colon separates each field (:). For
example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as a shorthand way
of representing multiple 16-bit groups of contiguous zeros; but it can only appea SWITCH/SNMP>
Default Setting:
empty
Example:
Set the SNMP trap IPv6 destination
SWITCH/>snmp trap IPv6 destination ????????????????????
SNMP Trap Authentication Faulure
Description:
Set or show the SNMP authentication failure trap mode.
Syntax:
SNMP Trap Authentication Failure [enable|disable]
Parameters:
enable : Enable SNMP trap authentication failure
disable : Disable SNMP trap authentication failure
(default: Show SNMP trap authentication failure mode)
Default Setting:
enable
Example:
Set the SNMP authentication failure trap mode
SWITCH/>snmp trap authentication disable
SNMP Trap Link-up
Description:
Set or show the port link-up and link-down trap mode.
Syntax:
SNMP Trap Link-up [enable|disable]
Parameters:
enable : Enable SNMP trap link-up and link-down