PLANET WGSD-8020 - Manual (Page 328)

User’s Manual of WGSD-8020
328
ACL Rate
Description:
Set or show the ACL rate limiter.
Syntax:
ACL Rate [] []
Parameters:
: Rate limiter list (1-15), default: All rate limiters
: Rate in pps (1, 2, 4, ..., 512, 1k, 2k, 4k, ..., 1024k)
Default Setting:
1
Example:
Set the ACL rate limiter
SWITCH/>acl rate 15 1024k
ACL Add
Description:
Add or modify Access Control Entry (ACE).
If the ACE ID parameter is specified and an entry with this ACE ID already exists, the ACE will be modified.
Otherwise, a new ACE will be added. If the ACE ID is not specified, the next available ACE ID will be used.
If the next ACE ID parameter is specified, the ACE will be placed before this ACE in the list. If the next
ACE ID is not specified, the ACE will be placed last in the list.
Syntax:
ACL Add [] [] [switch | (port ) | (policy )][] [] [][(etype
[] [] []) |(arp [] [] [] [] []) |(ip [] []
[] []) |(icmp [] [] [] [] []) |(udp [] [] []
[] []) |(tcp [] [] [] [] []
Parameters:
: ACE ID (1-128), default: Next available ID
: Next ACE ID (1-128), default: Add ACE last
switch : Switch ACE keyword
port : Port ACE keyword
: Port number
policy : Policy ACE keyword
: Policy number (1-8)
: VLAN ID (1-4095) or 'any'