PLANET WGSD-8020 - Manual (Page 341)

User’s Manual of WGSD-8020
341
Parameters:
: Time that a server is considered dead if it doesn't answer a request (0-3600 seconds)
(default: Show server dead time configuration)
Default:
300 seconds
Example:
Set 3000 seconds in server timeout value
SWITCH/>auth deadtime 3000
Authentication RADIUS Server
Description:
Set or show RADIUS authentication server setup.
Syntax:
Auth RADIUS [] [enable|disable] [] [] []
Parameters:
The server index (1-5)
(default: Show RADIUS authentication server configuration)
enable : Enable RADIUS authentication server
disable : Disable RADIUS authentication server
(default: Show RADIUS server mode)
: IP host address (a.b.c.d) or a host name string
: Secret shared with external authentication server. To set an empty secret, use two quotes (""). To use
spaces in secret, enquote the secret. Quotes in the secret are not allowed.
: Server UDP port. Use 0 to use the default RADIUS port (1812)
Default:
Mode: Disable, Port: 1812
Example:
Set all of parameters for RADIUS server
SWITCH/>auth radius 5 enable 192.168.0.111 1234567890 1812
Authentication RADIUS Accounting Server
Description:
Set or show RADIUS accounting server setup.
Syntax:
Auth ACCT_RADIUS [] [enable|disable] [] [] []