PLANET WGSD-8020 - Manual (Page 62)

User’s Manual of WGSD-8020
62
DO NOT Power OFF the Managed Switch until the update progress is complete.
Do not quit the Firmware Upgrade page without press the “OK” button - after the image be
loaded. Or the system won’t apply the new firmware. User has to repeat the firmware
upgrade processes again.
4.2.14 Configuration Save
This function allows backup and reload the current configuration of the Managed Switch to the local management station. The
screen in Figure 4-2-20 appears.
Figure 4-2-20 Configuration Save page screenshot
You can save/view or load the switch configuration. The configuration file is in XML format with a hierarchy of tags:
Header tags: and . These tags are mandatory and must be present
at the beginning of the file.
Section tags: , and . The platform section must be the first section tag and
this section must include the correct platform ID and version. The global section is optional
and includes configuration which is not related to specific switch ports. The switch section is
optional and includes configuration which is related to specific switch ports.
Module tags: , , etc. These tags identify a module controlling specific parts of the
configuration.
Group tags: , etc. These tags identify a group of parameters, typically a table.
Parameter tags: , etc. These tags identify parameters for the specific section, module and
group. The tag is used for table entries.
Configuration parameters are represented as attribute values. When saving the configuration from the switch, the entire
configuration including syntax descriptions is included in the file. The file may then be modified using an editor and loaded to a
switch.