PLANET WGSD-8020 - Manual (Page 142)

User’s Manual of WGSD-8020
142
•
Traffic Class The QoS class associated with the QCE.
•
Modification Buttons You can modify each QCE in the table using the following buttons:
: Inserts a new QCE before the current row.
: Edits the QCE.
: Moves the QCE up the list.
: Moves the QCE down the list.
: Deletes the QCE.
: The lowest plus sign adds a new entry at the bottom of the list of QCL.
4.9.3.1 QoS Control Entry Configuration
Configure a new QoS Control Entry on this page.
„ Frames can be classified by up to 4 different QoS classes: Low, Normal, Medium, and High.
„ The classification is controlled by a QCL assigned to each port.
„ A QCL consists of an ordered list of up to 12 QCEs.
„ Each QCE can be used to classify certain frames to a specific QoS Class.
„ This classification can be based on parameters such as VLAN ID, UDP/TCP port, IPv4/IPv6 DSCP or Tag Priority.
Frames not matching any of the QCEs are classified to the default QoS Class for the port.
The QCE Configuration screen in Figure 4-9-11 appears.
Figure 4-9-11 QCE Configuration page screenshot