PLANET WGSD-8020 - Manual (Page 321)

User’s Manual of WGSD-8020
321
6.10 802.1x Port Access Control Command
Dot1x Configuration
Description:
Show 802.1X configuration.
Syntax:
Dot1x Configuration []
Parameters:
: Port list or 'all', default: All ports
Example:
Show IEEE802.1x status of port1
SWITCH/>dot1x configuration 1
Mode : Disabled
Reauthentication : Disabled
Period : 3600
Timeout : 30
Age Period : 300
Hold Time : 10
Port Admin State Port State Last Source Last ID
---- ------------ --------------------- ----------------- -------
1 Authorized 802.1X Disabled - -
Dotx1 Mode
Description:
Set or show the 802.1X mode for the switch.
Syntax:
Dot1x Mode [enable|disable]
Parameters:
enable : Enable 802.1X
disable : Disable 802.1X
(default: Show 802.1X mode)
Default Setting:
Disable
Example:
Enable IEEE802.1x founction for port1