PLANET WGSD-8020 - Manual (Page 253)

User’s Manual of WGSD-8020
253
IP NTP Server Delet
Description:
Delete NTP server entry.
Syntax:
IP NTP Server Delete
Parameters:
: The server index (1-5)
Example:
To delet NTP server:
SWITCH/>ip ntp server delet 1
IP NTP Server IPv6 Add
Description:
Add NTP server IPv6 entry.
Syntax:
IP NTP Server Ipv6 Add
Parameters:
: The server index (1-5)
: IPv6 server address. IPv6 address is in 128-bit records represented as eight fields of up to four
hexadecimal digits with a colon separates each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The
symbol '::' is a special syntax that can be used as a shorthand way of representing multiple 16-bit groups
of contiguous zeros; but it can only appear once. It also used a following legally IPv4 address. For
example,'::SWITCH/IP>
IP IPv6 AUTOCONFIG
Description:
Set or show the IPv6 AUTOCONFIG mode.
Syntax:
IP IPv6 AUTOCONFIG [enable|disable]
Parameters:
enable : Enable IPv6 AUTOCONFIG mode
disable: Disable IPv6 AUTOCONFIG mode
Example:
To set IPv6 AUTOCONFIG:
SWITCH/>ip ipv6 autoconfig enable