PLANET WGSD-8020 - Manual (Page 162)

User’s Manual of WGSD-8020
162
„ ARP: Only ARP frames can match this ACE.
„ IPv4: Only IPv4 frames can match this ACE.
•
Action Specify the action to take with a frame that hits this ACE.
„ Permit: The frame that hits this ACE is granted permission for the ACE
operation.
„ Deny: The frame that hits this ACE is dropped.
•
Rate Limiter Specify the rate limiter in number of base units. The allowed range is 1 to 15.
Disabled indicates that the rate limiter operation is disabled.
• Port Copy Frames that hit the ACE are copied to the port number specified here. The allowed
range is the same as the switch port number range. Disabled indicates that the
port copy operation is disabled.
• Logging Specify the logging operation of the ACE. The allowed values are:
„ Enabled: Frames matching the ACE are stored in the System Log.
„ Disabled: Frames matching the ACE are not logged.
Please note that the System Log memory size and logging rate is limited.
• Shutdown Specify the port shut down operation of the ACE. The allowed values are:
„ Enabled: If a frame matches the ACE, the ingress port will be disabled.
„ Disabled: Port shut down is disabled for the ACE.
• Counter The counter indicates the number of times the ACE was hit by a frame.
„ MAC Parameters
The page includes the following fields:
Object Description
•
SMAC Filter (Only displayed when the frame type is Ethernet Type or ARP.)
Specify the source MAC filter for this ACE.
„ Any: No SMAC filter is specified. (SMAC filter status is "don't-care".)
„ Specific: If you want to filter a specific source MAC address with this ACE,
choose this value. A field for entering an SMAC value appears.
•
SMAC Value When "Specific" is selected for the SMAC filter, you can enter a specific source
MAC address. The legal format is "xx-xx-xx-xx-xx-xx". A frame that hits this ACE
matches this SMAC value.
•
DMAC Filter Specify the destination MAC filter for this ACE.
„ Any: No DMAC filter is specified. (DMAC filter status is "don't-care".)
„ MC: Frame must be multicast.
„ BC: Frame must be broadcast.
„ UC: Frame must be unicast.
„ Specific: If you want to filter a specific destination MAC address with this ACE,