PLANET WGSD-8020 User Manual
Page 61
User’s Manual of WGSD-8020
61
(Maximum length : 24 characters)
• Upgrade button
Press the button for upgrade the switch firmware.
To open Firmware Upgrade screen perform the folling:
1. Click
System
-> TFTP Firmware Upgrade.
2. The Firmware Upgrade screen is displayed as in
Figure 4-2-18.
3. Fill in the TFTP server IP Address and the firmware file name, click the “Upgrade” button of the main page, the system
would pop up the confirm message
.
Figure 4-2-18
TFTP Firmware upgrade pop-up message
4. Click
“OK”, the Managed Switch will start the TFTP upgrade procedure.
5. Please check your TFTP server application to confirm the TFTP file is well transmit to the Managed Switch.
Figure 4-2-19
Firmware Upgrade pop-up message
6. The Managed Switch will reboot then, and It will cost 2 to 3 minutes for the TFTP firmware upgrade and reboot procedure.
Please wait for the process complete.
7. Once the new software is loaded to the system successfully, the Login screen appears. Enter the user name and password
to login the Managed Switch.