PLANET WGSD-8020 - Manual (Page 46)

User’s Manual of WGSD-8020
46
The page includes the following fields:
Object Description
• Auto Configuration Enable IPv6 auto-configuration by checking this box.
If fails, the configured IPv6 address is zero. The router may delay responding to a
router solicitation for a few seconds, the total time needed to complete
auto-configuration can be significantly longer.
• Address Provide the IPv6 address of this switch.
IPv6 address is in 128-bit records represented as eight fields of up to four
hexadecimal digits with a colon separates each field (:). For example,
'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as
a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it
can only appear once. It also used a following legally IPv4 address. For example,
'::192.1.2.34'.
• Prefix Provide the IPv6 Prefix of this switch. The allowed range is 1 through 128.
• Gateway Provide the IPv6 gateway address of this switch.
•
VLAN ID Provide the managed VLAN ID. The allowed range is 1 through 4095
4.2.4 Users Configuration
This page provides an overview of the current users. Currently the only way to login as another user on the web server is to
close and reopen the browser. After setup completed, please press “Save” button to take effect. Please login web interface with
new user name and password, the screen in Figure 4-2-4 and Figure 4-2-5 appears.
Figure 4-2-4 Users Configuration page screenshot
The page includes the following fields: