PLANET WGSD-8020 - Manual (Page 168)

User’s Manual of WGSD-8020
168
Number
specific TCP/UDP destination value. The allowed range is 0 to 65535. A frame that
hits this ACE matches this TCP/UDP destination value.
• TCP/UDP Destination
Range
When "Range" is selected for the TCP/UDP destination filter, you can enter a
specific TCP/UDP destination range value. The allowed range is 0 to 65535. A
frame that hits this ACE matches this TCP/UDP destination value.
• TCP FIN Specify the TCP "No more data from sender" (FIN) value for this ACE.
• 0: TCP frames where the FIN field is set must not be able to match this entry.
• 1: TCP frames where the FIN field is set must be able to match this entry.
• Any: Any value is allowed ("don't-care").
• TCP SYN Specify the TCP "Synchronize sequence numbers" (SYN) value for this ACE.
• 0: TCP frames where the SYN field is set must not be able to match this entry.
• 1: TCP frames where the SYN field is set must be able to match this entry.
• Any: Any value is allowed ("don't-care").
• TCP PSH Specify the TCP "Push Function" (PSH) value for this ACE.
• 0: TCP frames where the PSH field is set must not be able to match this entry.
• 1: TCP frames where the PSH field is set must be able to match this entry.
• Any: Any value is allowed ("don't-care").
• TCP ACK Specify the TCP "Acknowledgment field significant" (ACK) value for this ACE.
• 0: TCP frames where the ACK field is set must not be able to match this entry.
• 1: TCP frames where the ACK field is set must be able to match this entry.
• Any: Any value is allowed ("don't-care").
• TCP URG Specify the TCP "Urgent Pointer field significant" (URG) value for this ACE.
• 0: TCP frames where the URG field is set must not be able to match this entry.
• 1: TCP frames where the URG field is set must be able to match this entry.
• Any: Any value is allowed ("don't-care").
„ Ethernet Type Parameters
The Ethernet Type parameters can be configured when Frame Type "Ethernet Type" is selected.
The page includes the following fields:
Object Description
•
EtherType Filter Specify the Ethernet type filter for this ACE.
Any : No EtherType filter is specified (EtherType filter status is "don't-care").
Specific : If you want to filter a specific EtherType filter with this ACE, you can enter
a specific EtherType value. A field for entering a EtherType value appears.
•
Ethernet Type Value When "Specific" is selected for the EtherType filter, you can enter a specific
EtherType value. The allowed range is 0x600 to 0xFFFF. A frame that hits this
ACE matches this EtherType value.