PLANET WGSD-8020 - Manual (Page 241)

User’s Manual of WGSD-8020
241
System Access Add
Description:
Add access management entry.
Syntax:
System Access Add [web|snmp|telnet]
Parameters:
: entry index (1-16)
: Start IP address (a.b.c.d)
: End IP address (a.b.c.d)
web : WEB interface
snmp : SNMP interface
telnet : TELNET interface
(default: Show configured and current mode)
Default Setting:
Empty
Example:
To set system access add:
SWITCH/>system access add 1 192.168.0.20 192.168.0.30 snmp
System Access Ipv6 Add
Description:
Add access management IPv6 entry.
Syntax:
System Access Ipv6 Add [web|snmp|telnet]
Parameters:
: entry index (1-16)
: Start IPv6 address. IPv6 address is in 128-bit records represented as eight fields of up to four
hexadecimal digits with a colon separates each field (:). For example,'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it can only
appear once. It also used a following legally IPv4 address. For example,'::192.1.2 : End IPv6 address.
IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a colon separates each
field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as a shorthand way of
representing multiple 16-bit groups of contiguous zeros; but it can only appear once. It also used a following legally
IPv4 address. For example,'::192.1.2.3web : WEB interface
snmp : SNMP interface
telnet : TELNET interface
(default: Show configured and current mode)