PLANET WGSD-8020 - Manual (Page 212)

User’s Manual of WGSD-8020
212
•
Port Mode
Configuration
Specify IP Source Guard is enabled on which ports. Only when both Global Mode
and Port Mode on a given port are enabled, IP Source Guard is enabled on this
given port.
•
Max Dynamic Clients
Specify the maximum number of dynamic clients can be learned on given ports.
This value can be 0, 1, 2, 3, and unlimited.
4.12.8 IP Source Guard Static Table
Configure IP Spurce Guard Static Table on this page.
Figure 4-12-10 IP Source Guard Static Table page screenshot
The page includes the following fields:
Object Description
• Delete Check to delete the entry. It will be deleted during the next save.
•
Port The logical port for the settings.
•
VLAN ID The vlan id for the settings.
•
IP Address Allowed Source IP address.
•
IP Mask It can be used for calculating the allowed netwok with IP address.
• Adding new entry Click Adding new entry to add a new entry to the Static IP Source Guard table.
Specify the Port, VLAN ID, IP address, and IP Mask for the new entry. Click
"Save".