PLANET WGSD-8020 - Manual (Page 196)

User’s Manual of WGSD-8020
196
the same server, send to a different server, or
give up. A retry to the same server is counted
as a retransmit as well as a timeout. A send to
a different server is counted as a Request as
well as a timeout.
Other Info
This section contains information about the state of the server and the latest round-trip time.
Name RFC4670 Name Description
State -
Shows the state of the server. It takes one of the following values:
„ Disabled: The selected server is disabled.
„ Not Ready: The server is enabled, but IP communication is not yet
up and running.
„ Ready: The server is enabled, IP communication is up and running,
and the RADIUS module is ready to accept accounting attempts.
„ Dead (X seconds left): Accounting attempts were made to this
server, but it did not reply within the configured timeout. The server
has temporarily been disabled, but will get re-enabled when the
dead-time expires. The number of seconds left before this occurs is
displayed in parentheses. This state is only reachable when more
than one server is enabled.
Round-Trip
Time
radiusAccClientExtRoundTripTime
The time interval (measured in milliseconds) between the most recent
Response and the Request that matched it from the RADIUS
accounting server. The granularity of this measurement is 100 ms. A
value of 0 ms indicates that there hasn't been round-trip communication
with the server yet.