PLANET WGSD-8020 - Manual (Page 313)

User’s Manual of WGSD-8020
313
6.9 Quality of Service Command
QoS Configuration
Description:
Show QoS Configuration.
Syntax:
QoS Configuration []
Parameters:
: Port list or 'all', default: All ports
Example:
Show QoS Configuration
SWITCH/> qos configuration
Traffic Classes: 4
Storm Multicast : Disabled 1 pps
Storm Broadcast : Disabled 1 pps
Storm Unicast : Disabled 1 pps
Port Default Tag Priority QCL ID Rate Limiter Shaper Mode Weight
---- ------- ------------ ------ ------------ --------- -------- ------
1 Low 0 1 Disabled Disabled Strict 1/2/4/8
2 Low 0 1 Disabled Disabled Strict 1/2/4/8
3 Low 0 1 Disabled Disabled Strict 1/2/4/8
4 Low 0 1 Disabled Disabled Strict 1/2/4/8
5 Low 0 1 Disabled Disabled Strict 1/2/4/8
6 Low 0 1 Disabled Disabled Strict 1/2/4/8
7 Low 0 1 Disabled Disabled Strict 1/2/4/8
8 Low 0 1 Disabled Disabled Strict 1/2/4/8
QoS Classes
Description:
Set or show the number of traffic classes.
Syntax:
QoS Classes []
Parameters:
: Number of traffic classes (1,2 or 4)
Default Setting: