PLANET WGSD-8020 - Manual (Page 163)

User’s Manual of WGSD-8020
163
choose this value. A field for entering a DMAC value appears.
•
DMAC Value When "Specific" is selected for the DMAC filter, you can enter a specific destination
MAC address. The legal format is "xx-xx-xx-xx-xx-xx". A frame that hits this ACE
matches this DMAC value.
„ VLAN Parameters
The page includes the following fields:
Object Description
•
VLAN ID Filter Specify the VLAN ID filter for this ACE.
„ Any: No VLAN ID filter is specified. (VLAN ID filter status is "don't-care".)
„ Specific: If you want to filter a specific VLAN ID with this ACE, choose this
value. A field for entering a VLAN ID number appears.
•
VLAN ID When "Specific" is selected for the VLAN ID filter, you can enter a specific VLAN ID
number. The allowed range is 1 to 4095. A frame that hits this ACE matches this
VLAN ID value.
•
Tag Priority Specify the tag priority for this ACE. A frame that hits this ACE matches this tag
priority. The allowed number range is 0 to 7. The value Any means that no tag
priority is specified (tag priority is "don't-care".)
„ ARP Parameters
The ARP parameters can be configured when Frame Type "ARP" is selected.
The page includes the following fields:
Object Description
•
ARP/ RARP Specify the available ARP/RARP opcode (OP) flag for this ACE.
• Any: No ARP/RARP OP flag is specified. (OP is "don't-care".)
• ARP: Frame must have ARP/RARP opcode set to ARP.
• RARP: Frame must have ARP/RARP opcode set to RARP.
• Other: Frame has unknown ARP/RARP Opcode flag.
•
Request/Reply Specify the available ARP/RARP opcode (OP) flag for this ACE.
• Any: No ARP/RARP OP flag is specified. (OP is "don't-care".)
• Request: Frame must have ARP Request or RARP Request OP flag set.
• Reply: Frame must have ARP Reply or RARP Reply OP flag.
•
Sender IP Filter Specify the sender IP filter for this ACE.
• Any: No sender IP filter is specified. (Sender IP filter is "don't-care".)