TA Triumph-Adler DCC 2725 - Manual (Page 91)

Basic Operation
3-19
3
Use the procedure below to produce stapled copies.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press [Org./Paper/Finishing] and then [Staple/
Punch].
4 Select the staple position.
NOTE: To use saddle stitching, press [Bind and Fold].
When placing originals, be sure to place the cover
page at the bottom. For more information on saddle
stitching, refer to Booklet from Sheets on page 4-18.
5 Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
6 Press [OK].
7 Press the Start key. Copying begins.
Staple/Punch
Top
Right
Staple Top
Left 2 staples
Top
2 staples
Right
Ready to copy. Copies
Status 10/10/2008 10:10
Cancel OK Add Shortcut
Preview
Original
Zoom
Paper
100%
---
:
:
: ---
Place original.
Top Edge Top
Original
Orientation
Punch
Off
Off
Bind
and Fold 2 staples
Left
2 holes
Top
2 holes
Left 4 holes
Left
4 holes
Top
4 holes
Right 2 holes
Right