TA Triumph-Adler DCC 2725 - Manual (Page 242)

Default Setting (System Menu)
8-2
Common Settings
Common settings include;
• Switching the Language for Display [Language] …8-2
• Default Screen …8-2
• Sound …8-3
• Original/Paper Settings …8-4
• Switching Unit of Measurement …8-11
• Error Handling …8-12
• Paper Output …8-14
• Orientation Confirmation …8-15
• Settings for Color Toner Empty Action …8-15
• Function Defaults …8-15
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Switching the Language for Display [Language]
Select the language displayed on the touch panel.
Use the procedure below to select the language.
1 Press the System Menu key.
2 Press [Common Settings] and then [Change] of Language.
3 Press the key for the language you want to use.
4 Press [OK].
The touch panel language will be changed.
Default Screen
Select the screen appearing right after start-up (default screen). The options are as follows.
The table below lists the available screens.
Item Description
Copy The Copy screen (the screen shown when the Copy key is pressed)
appears.
Send The Send screen (the screen shown when the Send key is pressed)
appears.
Status The Status/Job Cancel screen (the screen shown when the Status/
Job Cancel key is pressed) appears.