TA Triumph-Adler DCC 2725 - Manual (Page 47)

Preparation before Use
2-11
2
Adjusting the Operation Panel Angle
Adjust the angle of the operation panel in two as shown
by releasing the operation panel lock lever.
Switching the Language for Display [Language]
Select the language displayed on the touch panel.
Use the procedure below to select the language.
1 Press the System Menu key.
2 Press [Common Settings] and then [Change] of
Language.
3 Press the key for the language you want to use.
4 Press [OK].
The touch panel language will be changed.
Common Settings - Language
Set the language to use for the touch panel display.
English Français Deutsch Italiano
ǸțșșȒȐȑ Nederlands
Español
Cancel OK
Status 10/10/2008 10:10
Português