TA Triumph-Adler DCC 2725 - Manual (Page 141)

Copying Functions
4-19
4
For top binding
The folded copies can be read from top to bottom.
The procedure for using Booklet copying is explained below.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press [Layout/Edit] and then [Booklet].
4 Press [1-sided>>Booklet] to produce a booklet
from single-sided originals.
Press [2-sided>>Booklet] to produce a booklet
from two-sided originals.
Press [Book>>Booklet] to produce a booklet from
an open book original.
5 If you selected [2-sided>>Booklet] or
[Book>>Booklet], choose the binding orientation in
Finishing.
If you selected [1-sided>>Booklet], choose the
binding orientation in Finishing.
6 If you choose [1-sided>>Booklet],
[2-sided>>Booklet], or [Book>>Booklet] you can
add the cover. Press [Cover], select [Cover] and
press [OK].
7 Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
8 If the optional 3,000 sheet document finisher and
folding unit are installed, the [Saddle Stitch] option
is displayed.
To use saddle stitching, press [Saddle Stitch] and
then press [Bind and Fold]. You can saddle stitch
up to 16 sheets (64 pages).
9 Press [OK].
10 Platen and press the Start key. Copying begins.
Original Copy
Status 10/10/2008 10:10
Ready to copy. Copies
Cancel OK
Booklet
Add Shortcut
Original
2-sided
>>Booklet
1-sided
>>Booklet Binding
Top
Saddle
Stitch
Original
Orientation
Off
Binding
Left/Right
Book
>>Booklet
Finishing
Cover
Binding
Right
Binding
Left
Binding
Top
Original
Zoom
Paper :
:
: ---
---
100%
Preview
Place original.
Top Edge Top
Off
Off