TA Triumph-Adler DCC 2725 - Manual (Page 60)

Preparation before Use
2-24
Loading Paper in the Multi Purpose Tray
The multi purpose tray will hold up to 100 sheets of A4 or smaller plain paper (80 g/m 2 ) or up to 50 sheets of
plain paper (80 g/m
2
) lager than A4.
The multi purpose tray accepts paper sizes from A3 to A6 and Hagaki and from Ledger to Statement-R, 8K, 16K
and 16K-R. Be sure to use the multi purpose tray when you print on any special paper.
IMPORTANT: When using media types other than plain paper (such as recycled or colored paper), always
specify the media type setting. (Refer to Specifying Paper Size and Media Type for the Multi Purpose Tray on
page 2-30.) If you are using a paper weight of 106 g/m
2
or more, set the media type to Thick.
The capacity of the multi purpose tray is as follows.
• A4 or smaller plain paper (80 g/m
2
), recycled paper or color paper: 100 sheets
• B4 or larger plain paper (80 g/m
2
), recycled paper or color paper: 50 sheets
• Hagaki: 30 sheets
• OHP film: 10 sheets
• Envelope DL, Envelope C5, Envelope #10 (Commercial #10), Monarch, Youkei 4, Youkei 2: 10 sheets
NOTE: When you load custom size paper, enter the paper size by referring to Specifying Paper Size and
Media Type for the Multi Purpose Tray on page 2-30.
When you use special paper such as transparencies or thick paper, select the media type by referring to
Specifying Paper Size and Media Type for the Multi Purpose Tray on page 2-30.
1 Open the multi purpose tray.
2 When loading paper sizes from A3 to B4 and
Ledger to Legal, extend the support tray section of
the multi purpose tray.