TA Triumph-Adler DCC 2725 - Manual (Page 185)

Sending Functions
5-17
5
Adjusting Density
Use the procedure below to adjust the density when scanning the originals.
The table below shows the available settings.
The procedure for adjusting the density is explained below.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Color/Image Quality] and then [Density].
4 When selecting manual density adjustment, press
[-3] to [+3] (Lighter - Darker) to adjust density.
When selecting auto density adjustment, press
[Auto].
5 Press [OK].
6 Specify the destination, and press the Start key to
start sending.
Item Detail
Manual Adjust density using 7 or 13 levels.
Auto Optimum density is selected according to the density of the original.
Darker
Density
Auto
Normal Lighter
Cancel OK Add Shortcut
Status 08/08/2009 10:10
Preview
Original
Zoom
Send 100%
---
:
:
:
---
Place original.
Place original.
Ready to send. Destination
0 +1 +2 +3 -1 -2 -3
-2.5 -1.5 -0.5 +0.5 +1.5 +2.5