TA Triumph-Adler DCC 2725 - Manual (Page 234)

Status / Job Cancel
7-12
3 Press [On] and enter the number of jobs in the log
history print by using [+]/[-] or the numeric keys.
You can enter any number between 1 and 1500.
4 Press [OK].
Manual Log History Transmission
You can also send the log history to the specified destinations manually.
Use the procedure below to send the log history manually.
1 Press the System Menu key.
2 Press [Report], [Next] of Sending Log History and
then [Execute] of Send Log History.
When the confirmation screen appears, press
[Yes]. The log history is sent.
Setting E-mail Subject
Set the subject automatically entered when sending log histories by e-mail.
Use the procedure below to set the subject.
1 Press the System Menu key.
2 Press [Report], [Next] of Sending Log History and
then [Change] of Job Log Subject.
3 Enter an e-mail subject not more than 60
characters.
NOTE: Refer to the Character Entry Method on
Appendix-7 for details on entering characters.
4 Check that the entry is correct and press [OK].
Report - Auto Sending
Send job log history to the specified destination after a set number of jobs
have been logged.
On
Off
Jobs
(1 - 1500)
100
Cancel OK
Status 10/10/2008 10:10