TA Triumph-Adler DCC 2725 - Manual (Page 198)

Sending Functions
5-30
Send and Print
When you send originals, this feature allows you to print a copy of the document being sent.
The procedure for using Send and Print is explained below.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Advanced Setup] and then [Send and Print].
4 Press [On].
5 Press [OK].
6 Specify the destination and press the Start key.
Transmission begins and a copy of the transmitted
document is printed.
Send and Store
When you send originals, this feature allows you to store a copy of the document being sent in a Custom Box.
The procedure for using Send and Store is explained below.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Advanced Setup], [ ], and then [Send and
Store].
4 Press [On].
5 Select the Custom Box in which the copy is to be
stored.
If a password entry screen for the Custom Box
appears, enter the password.
You can view information on the selected Custom
Box by pressing [Detail].
6 Press [OK].
7 Specify the destination and press the Start key.
Transmission begins and a copy of the transmitted
document is stored in the specified Custom Box.
Send and Store
Off
On
No. Name Used Area
2/2
Cancel OK Add Shortcut
Status 08/08/2009 10:10
Place original.
Ready to send. Destination
0006 6%
0007 4%
0008 8%
0009 4%
0010 2%
Custom Box
BOX001
BOX002
BOX003
BOX004
BOX005
06
07
08
09
10 Detail