TA Triumph-Adler DCC 2725 - Manual (Page 277)

Default Setting (System Menu)
8-37
8
Override A4/Letter
Select whether to treat A4 size and Letter, which are similar in size, as the same size when printing. The table
below shows the available settings.
Use the procedure below to specify the override A4/Letter setting.
1 Press the System Menu key.
2 Press [Printer] and [Change] of Override A4/Letter.
3 Press [Off] or [On].
4 Press [OK].
Duplex
Select binding orientation for duplex mode. The table below shows the available settings.
Use the procedure below to select a duplex setting.
1 Press the System Menu key.
2 Press [Printer] and [Change] of Duplex.
3 Press [1-sided], [2-sided Bind LongEdge], or [2-sided Bind ShortEdge].
4 Press [OK].
Copies
Set the default number of copies, from 1 to 999.
Use the procedure below to specify the default number of copies.
Item Description
On A4 and Letter are regarded as the same in size. The machine will
use whichever size is in the paper source.
Off A4 and Letter are not regarded as the same in size.
Item Description Finish
1-sided No duplex mode
2-sided Bind
ShortEdge Shorter edge bound
2-sided Bind
LongEdge Longer edge bound