TA Triumph-Adler DCC 2725 - Manual (Page 83)

Basic Operation
3-11
3
XY Zoom
Select vertical and horizontal magnifications
individually. Reduce or enlarge original images in 1%
increments between 25% and 400%.
The procedure for using zoom copying is explained below.
1 Press the Copy key.
2 Place the originals on the platen.
3 Set the original on the platen and press [Layout/
Edit] -> [Zoom].
4 Press [Standard Zoom] to use Auto Zoom.
Press [+] or [–] to change the displayed
magnification as desired. You can also enter the
magnification directly using the numeric keys by
pressing [# Keys].
When using Preset Zoom, select the key of desired
magnification.
When using XY Zoom, press [XY Zoom].
Press [+] or [–] to change the displayed
magnifications of X (horizontal) and Y (vertical).
You can also enter the magnification directly using
the numeric keys by pressing [# Keys].
Press [Original Orientation] to select orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
5 Press [OK].
6 Press the Start key. Copying begins.
Y
X
Status 10/10/2008 10:10
Cancel OK
Zoom
Place original.
Add Shortcut
(25 - 400)
Standard
Zoom
XY Zoom
127%
400%
100%
Auto
200%
106%
141%
# Keys
50%
90%
75%
25%
70%
Folio
>>A3
Max.
A5>>A3
11x15"
>>A3
A4>>A3
A5>>A4
Folio
>>A4
11x15"
>>A4
Min.
A3>>A4
A4>>A5
Ready to copy. Copies
1
%
Preview
400
Original
Zoom
Paper :
:
: ---
---
100%
Status 10/10/2008 10:10
Ready to copy. Copies
Cancel OK
Zoom
Add Shortcut
X Standard
Zoom
XY Zoom
%
(25 - 400)
Y
(25 - 400)
%
# Keys
# Keys
Original
Orientation
Original :
:
: Zoom
Paper
Preview
100
100
---
---
100%
Place original.
Top Edge Top