TA Triumph-Adler DCC 2725 - Manual (Page 156)

Copying Functions
4-34
Sharpness Adjust
Adjust the sharpness of image outlines. When copying penciled originals with rough or broken lines, clear copies
can be taken by adjusting sharpness toward [Sharpen]. When copying images made up of patterned dots such
as magazine photos, in which moire
*
patterns appear, edge softening and weakening of the moire effect can be
obtained by setting the sharpness toward [Unsharpen].
*
Patterns that are created by irregular distribution of halftone dots.
Refer to the sample image in Quick Guide to Adjusting Image Quality.
Follow the steps below to adjust sharpness.
1 Press Copy key.
2 Place the originals on the platen.
3 Press [Color/Image Quality] and then Press
[Sharpness].
4 Press [-3] to [3] (Unsharpen - Sharpen) to adjust
the sharpness.
5 Press [OK].
6 Press the Start key. Copying begins.
Sharpness
Ready to copy. Copies
Status 10/10/2008 10:10
Cancel OK Add Shortcut
Preview
Original
Zoom
Paper 100%
---
:
:
:
---
Sharpen Unsharpen
0 +1 +2 +3 -1 -2 -3
Place original.