Background density adjustment, Background density adjustment -20, Sending functions 5-20 – TA Triumph-Adler DCC 2725 User Manual
Page 188: Press the send key, Place the originals on the platen, Press [ok
Sending Functions
5-20
Background Density Adjustment
Lightens the background of the colored original when it is too dark.
NOTE:
You cannot adjust the background density if you selected [Black & White] in Color / Grayscale / Black
and White Selection (see page 5-21).
Use the procedure below to set the background density when sending scanned images.
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then [Background
Density Adj.].
4
Press [On], and press [1] to [5] (Lighter - Darker) to
adjust the background density.
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
On
Off
Background
Background Density Adj.
Lighter
Darker
Preview
Original
Zoom
Send
100%
---
:
:
:
---
Place original.
Cancel
OK
Add Shortcut
Status
08/08/2009 10:10
Place original.
Ready to send.
Destination
1
2
3
4
5