TA Triumph-Adler DCC 2725 - Manual (Page 264)

Default Setting (System Menu)
8-24
High Comp. PDF Image
Select the default quality setting for high compressed PDF files.
The table below shows the available settings.
Use the procedure below to select the default quality setting for highly compressed PDF files.
1 Press the System Menu key.
2 Press [Common Settings], [ ] and [Next] of Function Defaults. Press [ ] twice and [Change] of High
Comp. PDF Image.
3 Select the default for [Compression Ratio Priority], [Standard], or [Quality Priority].
4 Press [OK].
Color TIFF Compression Settings
Select the compression method for TIFF images handled on this machine. Use the procedure below to set the
default Color TIFF Compression setting.
1 Press the System Menu key.
2 Press [Common Settings], [ ] and [Next] of Function Defaults. Press [ ] twice and then [Change] of Color
TIFF Compression.
3 Select [TIFF V6] or [TTN2].
4 Press [OK].
Repeat Copying
Select the Repeat Copy default. The options are as follows. The table below shows the available settings.
NOTE: This setting is not displayed when the optional Data Security Kit is installed or the Repeat Copy job is
set to 0.
Refer to page 4-42 for Repeat Copy.
Use the procedure below to set the default Repeat Copy setting.
Item Description
Compression Ratio Priority Compression Ratio is given priority with smaller file size.
Standard Standard quality
Quality Priority Image quality is given priority with larger file size.
Item Description
Off No Repeat Copy is performed.
On Repeat Copy is performed.