TA Triumph-Adler DCC 2725 - Manual (Page 239)

Status / Job Cancel
7-17
7
Configuring the Devices
Detailed information on controlling devices is given below.
Removable Memory (USB Memory)
• The usage and capacity of the external media connected to this machine are displayed.
• Press [Format] to format external media.
• Press [Remove] to safely remove the external media. For details, refer to Removing the USB Memory in the
next section.
FAX Port 1, FAX Port 2
• The information such as sending/receiving and dialing is displayed.
• Press [Line Off] to cancel a fax in sending/receiving. For details, refer to Canceling FAX Communication on
page 7-18 in the section afterwards.
• Press [Manual RX] to start a fax. Use this function when you want to talk to the sender before receiving the
fax originals. For details, refer to the Operation Guide of FAX kit.
• Press [Log] to display the fax transmission history. For details, refer to the Operation Guide of FAX kit.
Removing the USB Memory
There is a way to remove the USB memory safely.
Use the procedure below to remove the USB memory.
1 Press the Status/Job Cancel key.
2 Press [Device/Communication] > [Remove] in
Removable Memory.
3 When Removable memory can be safely removed.
is displayed, remove the USB memory.
Overwriting...
Scanner
Ready.
Printer
Not connected.
Removable Memory
Hard Disk
䊜䊝䊥䉦䊷䊄
Format Remove
Line Off Manual RX
FAX Port 1
Log FAX Check New FAX i-FAX
FAX Port 2
Line Off
10/10/2008 10:10 Status
Printing Jobs Sending Jobs Storing Jobs Device/
Communication
Paper/Supplies
Status
Dialing... Receiving...
Ready.
Overwriting...
Scanner
Ready.
Printer
Not connected.
Removable Memory
Hard Disk
䊜䊝䊥䉦䊷䊄
Format Remove
Line Off Manual RX
FAX Port 1
Log FAX Check New FAX i-FAX
FAX Port 2
Line Off
10/10/2008 10:10 Status
Printing Jobs Sending Jobs Storing Jobs Device/
Communication
Paper/Supplies
Status
Dialing... Receiving...
Ready.