Eicon Networks 1550 - Manual (Page 85)

Web Interface Settings Glossary 85
Callback numbers
User specified mode only. Specify the two numbers that the server uses to call back.
Each number should contain the required dialing pre-fixes that the server must use. If
you only have one ISDN number, enter it in both fields.
Delay before host calls back
Callback control protocol only. Sets the amount of time the server waits before calling
back. The Eicon 1551 WAN Router proposes the delay during callback negotiation.
The server can either accept or reject it.
Range: 1 to 30.
Default: 5.
Timeout waiting for callback
Sets the amount of time the Eicon 1551 WAN Router waits for the server to call back.
During this time, the Eicon 1551 WAN Router may accept incoming calls that are not
from the callback server unless you activate remote authentication.
Range: 20 to 240.
Default: 30.