Step 2: log in to the eicon 1550/1551 – Eicon Networks 1550 User Manual
Page 16
Setup
16
Step 2: Log in to the Eicon 1550/1551
Whenever you wish to change settings on the Eicon 1550/1551, you must first log in
using a web browser, as shown below.
1.
Launch your web browser.
2.
Click ‘File’, ‘Open’, then enter the following IP address:
192.168.1.1
3.
Click ‘OK’. You should see the ‘Log in’ page.
Note:
If you do not see the ‘Log in’ page, see
4.
Click the ‘Log in’ button.
Note:
By default there is no password.