Eicon Networks 1550 - Manual (Page 119)

Web Interface Settings Glossary 119
Dialer Menu (VHSI Tree) V.25bis
Note: These options appear when the dialer option is set to V.25bis.
Enable answering
Enables/disables answering of incoming calls by the modem (DCE) connected the
port. When enabled, the modem will automatically answer incoming calls.
Default: Enable.
Allow retry
Specifies if the modem should redial if the primary number is busy or otherwise does
not respond. If you enable this option, the secondary number, if defined, will be
redialed. If the secondary number is not defined, the primary number will be redialed.
Retry limit
Defines the maximum number of dialing attempts to be made when a busy or
unresponsive phone number is encountered. If a secondary number is defined, the
dialer will alternate between the primary and secondary numbers until a call is
successfully completed or until the retry limit is reached. Each time the primary or
secondary number is dialed counts as a retry attempt. For example, specifying 6
allows the primary and the secondary number to be dialed a maximum of three times
each.
Range: 1-9. Default: 4.
Delay between retries
Defines the delay before redialing, in seconds.
Default: 5