Eicon Networks 1550 - Manual (Page 127)

Web Interface Settings Glossary 127
ISDN Menu > Incoming Calls
Note: The following pages refer to the ISDN feature available only with the Eicon 1551 WAN Router.
Answer incoming data calls
Specifies if the Eicon 1551 will answer incoming ISDN data calls. If disabled, incoming
data calls are ignored. Default: Disabled.
Always use encrypted authentication for incoming calls
Enables/disables using encrypted authentication for incoming calls. Default: Enabled.
Enable call screening
Enables/disables ISDN call screening. When enabled, an incoming data call is only
accepted if its number appears in the call screening table.
Calls can be screened for each ISDN number assigned to the Eicon 1551 WAN
Router.